PRODUCT / SC-QT
SC-QT small- and medium-power hydraulic power unit
One page for the manual-listed range, configuration codes and the decisions that still require engineering and procurement review.
Start with your duty data
SPECIFICATIONS
Typical range listed in the current manual
- Motor power
- 0.75 / 1.5 kW ≈ 1 / 2 hp
- Working pressure
- 0–8 MPa ≈ 0–1,160 psi
- Rated flow
- 12 / 15 L/min ≈ 3.2 / 4.0 US gpm
- Tank volume
- 16 / 20 L ≈ 4.2 / 5.3 US gal
Pre-selection information is not a quotation or fitness commitment. Final model, ports, power supply, standards, certification, price and lead time require written human confirmation.
CONFIGURATION CODES
Configuration codes listed in the current manual
These codes are transcribed from the current manual. They do not imply every combination, stock availability or destination-market suitability.| Configuration code | Power | Tank | Station | Layout |
|---|---|---|---|---|
| SC-QT-0.75-16-1-L | 0.75 kW | 16 L | 1 | Vertical |
| SC-QT-0.75-16-2-L | 0.75 kW | 16 L | 2 | Vertical |
| SC-QT-0.75-16-3-L | 0.75 kW | 16 L | 3 | Vertical |
| SC-QT-1.5-20-1-W | 1.5 kW | 20 L | 1 | Horizontal |
| SC-QT-1.5-20-2-W | 1.5 kW | 20 L | 2 | Horizontal |
| SC-QT-1.5-20-3-W | 1.5 kW | 20 L | 3 | Horizontal |
SELECTION INPUTS
Prepare these duty inputs before selection
- Machine and motion description
- Working pressure and required flow
- Duty cycle, holding time and starts
- Destination power and electrical requirements
- Installation envelope, orientation and ports
- Applicable standards, documents and certification
BOUNDARIES
Configuration directions and boundaries
- Power supply
- The current version is three-phase AC380V / 50Hz; export projects require a fresh review.
- Hydraulic fluid
- The current manual lists ISO VG 46 anti-wear hydraulic oil.
- Layout and stations
- L / W denote vertical / horizontal; 1 / 2 / 3 denote station count.
- Ports and standards
- Envelope, ports, controls, destination standards and certification remain project-specific confirmations.
VERIFY, THEN CLAIM
How performance claims should be verified
Record the existing baseline on the same machine, duty cycle and measurement boundary, then configure and re-test. This site does not publish a context-free energy-saving percentage.
Review the verification method01Can these values be used directly for purchasing?
No. They support initial screening. Purchase decisions should follow the mutually confirmed model, drawings, technical agreement and factory documents.
02Can overseas projects use AC380V / 50Hz as-is?
That cannot be assumed. Destination power, electrical rules, applicable standards and certification must be reviewed individually.
03Why is there no fixed energy-saving percentage?
Results depend on the baseline, duty cycle, measurement boundary and selected technology, and should be stated only after a controlled re-test.